LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 287 (Engine Cooling System & Automatic Transmission Cooling System) >> Accessory Drive >> TENSIONER, Belt >> Removal >> 3.0L Diesel

3.0L Diesel

WARNING: This page is about a different car, the 2010 Dodge Charger and 2010 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Drive Belt 3.0L Diesel
GC0079898Courtesy of CHRYSLER LLC
WARNING: Because of high spring pressure, do not attempt to disassemble automatic tensioner. Unit is serviced as an assembly.
  1. Disconnect negative battery cable.
  2. Remove accessory drive belt. See Cooling/Accessory Drive/BELT, Serpentine - Removal .
  3. Remove belt tensioner retaining bolt and remove tensioner from bracket.
scientia non olet · About LEMON Manuals