LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 287 (Engine Cooling System & Automatic Transmission Cooling System) >> Accessory Drive >> TENSIONER, Belt >> Installation >> 5.7L/6.1L

TENSIONER, Belt: Installation: 5.7L/6.1L

WARNING: This page is about a different car, the 2010 Dodge Charger and 2010 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: TENSIONER - 5.7L/6.1L ENGINE
GC0095201Courtesy of CHRYSLER LLC
1 - TENSIONER
2 - BOLT
  1. Install tensioner bolt (2) to tensioner (1). Tighten bolt to 34 N.m (40 ft. lbs.).
  2. Install accessory drive belt. See Cooling/Accessory Drive/BELT, Serpentine - Installation .
  3. Check belt indexing marks.
scientia non olet · About LEMON Manuals