LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 287 (Engine Cooling System & Automatic Transmission Cooling System) >> Accessory Drive >> TENSIONER, Belt >> Installation >> 3.0L Diesel

3.0L Diesel

WARNING: This page is about a different car, the 2010 Dodge Charger and 2010 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Drive Belt 3.0L Diesel
GC0079898Courtesy of CHRYSLER LLC
  1. Install belt tensioner on bracket. Tighten retaining bolt to 47 N.m (34 ft. lbs.).
  2. Install accessory drive belt. See Cooling/Accessory Drive/BELT, Serpentine - Installation .
  3. Connect negative battery cable.
scientia non olet · About LEMON Manuals