LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 287 (Engine Cooling System & Automatic Transmission Cooling System) >> Accessory Drive >> PULLEY, Idler >> Removal >> 3.0L Diesel

3.0L Diesel

WARNING: This page is about a different car, the 2010 Dodge Charger and 2010 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Drive Belt 3.0L Diesel
GC0081530Courtesy of CHRYSLER LLC
  1. Remove accessory drive belt (3). See Cooling/Accessory Drive/BELT, Serpentine - Removal .
  2. Remove cover.
  3. Remove bolt and idler pulley (8).
scientia non olet · About LEMON Manuals