LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 287 (Engine Cooling System & Automatic Transmission Cooling System) >> Accessory Drive >> PULLEY, Idler >> Removal >> 2.7L

PULLEY, Idler: Removal: 2.7L

WARNING: This page is about a different car, the 2010 Dodge Charger and 2010 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Idler Pulley - 2.7L Engine
GC0079901Courtesy of CHRYSLER LLC
1 - IDLER PULLEY
2 - BOLT (part of pulley)
3 - COVER
  1. Remove accessory drive belt. See Cooling/Accessory Drive/BELT, Serpentine - Removal .
  2. Remove cover (3).
  3. Remove bolt (2) and idler pulley (1).
scientia non olet · About LEMON Manuals