LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 287 (Engine Cooling System & Automatic Transmission Cooling System) >> Accessory Drive >> PULLEY, Idler >> Installation >> 3.0L Diesel

3.0L Diesel

WARNING: This page is about a different car, the 2010 Dodge Charger and 2010 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Drive Belt 3.0L Diesel
GC0081531Courtesy of CHRYSLER LLC
  1. Position idler pulley (8).
  2. Install idler pulley mounting bolt. Tighten to 28 N.m (250 in. lbs.).
  3. Install cover.
  4. Install accessory drive belt (3). See Cooling/Accessory Drive/BELT, Serpentine - Installation 
scientia non olet · About LEMON Manuals