LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 285 (2.7L Engine (Service Information)) >> Manifolds >> MANIFOLD, Intake >> Removal >> Removal - Intake Manifold Lower

Removal - Intake Manifold Lower

WARNING: This page is about a different car, the 2010 Dodge Charger and 2010 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Locating Battery
GC0081581Courtesy of CHRYSLER LLC
  1. Release fuel system pressure. Refer to Fuel System/Fuel Delivery - Standard Procedure .
  2. Disconnect negative battery (1) cable located in trunk.
  3. Remove upper intake manifold. See Engine/Manifolds/MANIFOLD, Intake - Removal .
    Fig 2: Fuel Feed Line & Injector Connectors
    GC0081592Courtesy of CHRYSLER LLC
  4. Disconnect injector electrical connectors (2).
  5. Disconnect fuel supply hose (1) from fuel rail. Refer to Fuel System/Fuel Delivery/FITTING, Quick Connect - Standard Procedure .
    Fig 3: Lower Intake Manifold Tightening Sequence
    GC0095441Courtesy of CHRYSLER LLC
  6. Remove bolts attaching fuel rail (1 - 4).
  7. Remove fuel rail and injectors as an assembly.
  8. Remove manifold attaching bolts.
  9. Remove lower manifold.
  10. Inspect manifold. See Engine/Manifolds/MANIFOLD, Intake - Inspection .
scientia non olet · About LEMON Manuals