LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 285 (2.7L Engine (Service Information)) >> Engine Block >> ROD, Piston and Connecting >> Standard Procedure >> Standard Procedure - Fitting Pistons >> Piston Pins

Piston Pins

WARNING: This page is about a different car, the 2010 Dodge Charger and 2010 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.

The piston pin is full floating and is held in place by lock rings. Do Not switch pistons with other rods  . Pistons and connecting rods are serviced as an assembly for balance.

scientia non olet · About LEMON Manuals