LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 285 (2.7L Engine (Service Information)) >> Engine Block >> Crankshaft >> Standard Procedure >> Standard Procedure - Crankshaft End Play

Standard Procedure - Crankshaft End Play

WARNING: This page is about a different car, the 2010 Dodge Charger and 2010 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: CHECKING CRANKSHAFT END PLAY
GC0081626Courtesy of CHRYSLER LLC
  1. Mount a dial indicator to a stationary point at front of engine. Locate the probe perpendicular against nose of crankshaft .
  2. Move crankshaft all the way to the rear of its travel.
  3. Zero the dial indicator.
  4. Move crankshaft all the way to the front and read the dial indicator. For crankshaft end play clearances, see Engine - Specifications .
scientia non olet · About LEMON Manuals