LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 284 (Ignition Control (Service Information)) >> SENSOR, Camshaft Position >> Removal >> 2.7L

SENSOR, Camshaft Position: Removal: 2.7L

WARNING: This page is about a different car, the 2010 Dodge Charger and 2010 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: 2.7 CAM SENSOR
GC0080079Courtesy of CHRYSLER LLC
  1. Disconnect and isolate the negative battery cable.
  2. Unlock and disconnect electrical connector.
    Fig 2: 2.7 CAM SENSOR REMOVED
    GC0080080Courtesy of CHRYSLER LLC
  3. Remove mounting bolt.
  4. Remove sensor.