LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 284 (Ignition Control (Service Information)) >> COIL, Ignition >> Removal >> 2.7L

COIL, Ignition: Removal: 2.7L

WARNING: This page is about a different car, the 2010 Dodge Charger and 2010 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect and isolate the negative battery cable.
  2. Remove upper intake manifold. Refer to Engine/Manifolds/MANIFOLD, Intake - Removal .
  3. Disconnect the electrical connector from ignition coils.
  4. Remove fastener from each ignition coil assembly.
  5. Twist, lift and remove ignition coil from engine.
scientia non olet · About LEMON Manuals