LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 284 (Ignition Control (Service Information)) >> COIL, Ignition >> Installation >> 2.7L

COIL, Ignition: Installation: 2.7L

WARNING: This page is about a different car, the 2010 Dodge Charger and 2010 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. Align coil with top of spark plug.
  2. Twist coil assembly down on to spark plug and install mounting bolt.
  3. Tighten bolt to 7.5 N.m (65 in. lbs.).
  4. Connect electrical connector to ignition coil.
  5. Install upper intake manifold. Refer to Engine/Manifolds/MANIFOLD, Intake - Installation .
  6. Connect negative battery cable and tighten nut to 5 N.m (45 in. lbs.).
scientia non olet · About LEMON Manuals