CAPACITOR, Ignition: Installation: 3.5L
WARNING: This page is about a different car, the 2010 Dodge Charger and 2010 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Courtesy of CHRYSLER LLC
- Install ignition coil capacitor (2) and bolt (1).
- Tighten bolt to 28 N.m (20.5 ft. lbs.).
- Connect electrical connector (3).
- Connect negative battery cable and tighten nut to 5 N.m (45 in. lbs.).