LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 284 (Ignition Control (Service Information)) >> CAPACITOR, Ignition >> Installation >> 2.7L 1st

2.7L 1st

WARNING: This page is about a different car, the 2010 Dodge Charger and 2010 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: IGNITION COIL CAPACITOR 2.7L
GC0080069Courtesy of CHRYSLER LLC
  1. Install ignition coil capacitor and nut.
  2. Tighten nut to 10 N.m (88.5 in. lbs.).
  3. Attach electrical connector to capacitor.
  4. Connect negative battery cable and tighten nut to 5 N.m (45 in. lbs.).
scientia non olet · About LEMON Manuals