LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 281 (Body - Interior & Exterior) >> Interior >> PANEL, Cowl Trim >> Removal >> Lower

PANEL, Cowl Trim: Removal: Lower

WARNING: This page is about a different car, the 2010 Dodge Charger and 2010 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Lower Cowl Trim
GC0080742Courtesy of CHRYSLER LLC
  1. Remove the upper cowl trim from the front of the front door opening. See Body/Interior/PANEL, Cowl Trim - Removal .
  2. Using a trim stick or another suitable wide flat-bladed tool and starting nearest the B-pillar trim (2), carefully pry the lower cowl trim (3) upward from the front door opening sill far enough to disengage the three spring clip retainers that secure the trim to the slots in the sill.
  3. Using a trim stick or another suitable wide flat-bladed tool, carefully pry the lower cowl trim rearward from the front of the front door opening far enough to disengage the spring clip retainer that secures the trim to the slot in the cowl (1).
  4. Remove the lower cowl trim from the vehicle.