LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 28 (Starting System) >> Starting >> Diagnosis And Testing >> Diagnosis And Testing - Control Circuit Test >> Ignition Switch

Ignition Switch

WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.

After testing starter solenoid and relay, test ignition switch and wiring. Refer to the IGNITION SYSTEM - ELECTRICAL DIAGNOSTICS or appropriate SYSTEM WIRING DIAGRAMS article for more information. Check all wiring for opens or shorts, and all connectors for being loose or corroded.

scientia non olet · About LEMON Manuals