A/C Compressor
WARNING: This page is about a different car, the 2010 Dodge Charger and 2010 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Typical A/C compressor shown in illustration.
The A/C system on models equipped with the 2.7L, 3.0L and 3.5L engine use a Denso 10S17 A/C Compressor (1). Models equipped with the 5.7L and 6.1L engine use a Denso 10SRE18 A/C Compressor. Both A/C compressors are ten cylinder, double-acting, swash plate type compressors, with the suction and discharge ports (2) located on the cylinder head (3).
A label identifying the use of R-134a refrigerant is located on each A/C compressor.