LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 270 (42RLE Automatic Transmission - Electrical Diagnostics) >> 42RLE - Electrical Diagnostics >> DTC Troubleshooting >> P1745-Transmission Line Pressure Too High For Too Long >> Diagnostic Test

Diagnostic Test

WARNING: This page is about a different car, the 2008 Dodge Magnum, 2008 Dodge Charger, and 2008 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. 1) CHECK FOR RELATED DTCS 

    With the scan tool, check for Transmission Line Pressure DTCs.

    NOTE: In order to erase this DTC you must reset (erase) the VLP Shift Counter and the Output tooth counter which is a single procedure under Miscellaneous functions in the scan tool called "Clear Variable Line Pressure (VLP) counters".

    View repair 

    Repair 

    1. Refer to appropriate Transmission DTC and perform the appropriate symptom.
scientia non olet · About LEMON Manuals