LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 27 (Anti-Lock Brake System - Electrical Diagnostics) >> Abs Electrical Diagnostics >> DTC Troubleshooting >> C2200-Anti-Lock Brake Module Internal >> Diagnostic Test

Diagnostic Test

WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. 1)  ABM INTERNAL FAILURE DTC PRESENT 

    Turn the ignition on.

    With the scan tool, read DTCs.

    With the scan tool, erase DTCs.

    Turn the ignition off.

    Turn the ignition on.

    With the scan tool, read DTCs.

    Does the scan tool display ANTI-LOCK BRAKE MODULE INTERNAL FAILURE? 

    Yes 

    1. Replace the Anti-Lock Brake Module in accordance with the Service Information.
    2. Perform ABS VERIFICATION TEST - VER 1 .

    No 

    1. Refer to ABS INTERMITTENT CONDITION .
    2. Perform ABS VERIFICATION TEST - VER 1 .