LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 27 (Anti-Lock Brake System - Electrical Diagnostics) >> Abs Electrical Diagnostics >> DTC Troubleshooting >> C107C-Brake Pedal Switch 1/2 Stuck >> Possible Causes

Possible Causes

WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Possible Causes 
WIRING HARNESS, TERMINAL, CONNECTOR DAMAGE
STOP LAMP RELATED DTCs OR SYMPTOMS PRESENT
MISADJUSTED PEDAL SWITCH
PRESSURE SENSOR OR VOLTAGE RELATED DTCs PRESENT
(B15) BRAKE SWITCH NO. 1 SIGNAL CIRCUIT OPEN
(B15) BRAKE SWITCH NO. 1 SIGNAL CIRCUIT SHORT TO GROUND
STOP LAMP SWITCH
ANTI-LOCK BRAKES MODULE