Section Identification And Information
The wiring diagrams are grouped into individual sections. If a component is most likely found in a particular group, it will be shown complete (all wires, connectors, and pins) within that group. For example, the Auto Shutdown Relay is most likely to be found in BUZZERS, RELAYS & TIMERS , so it is shown there complete. It can, however, be shown partially in another group if it contains some associated wiring.
Splice diagrams (refer to SPLICES table in CONNECTOR/GROUND/SPLICE LOCATION article) show the entire splice and provide references to other sections the splices serves. CONNECTOR/GROUND/SPLICE LOCATION article only contains splice diagrams that are not shown in their entirety somewhere else in the wiring diagrams.
CONNECTOR PIN-OUTS article shows each connector and the circuits involved with that connector.