LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 264 (Power Top & Sunroof (Service Information)) >> Power Top - Sunroof Service Information >> Switch - Sunroof >> Operation >> Sunroof Switch

Sunroof Switch

WARNING: This page is about a different car, the 2008 Dodge Magnum, 2008 Dodge Charger, and 2008 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.

The power sunroof switch is hard wired to the sunroof motor/module assembly. The switch receives battery current from the motor/module when the ignition switch is in the RUN and ACCESSORY positions or the vehicle Accessory Delay System is active. When one of the switch positions is pressed it sends battery current back to the motor/module, signaling it to move the power sunroof to the appropriate position. The motor/module will perform one of the following functions:

  1. Power sunroof open (back of switch pushed)
  2. Power sunroof closed (front of switch pushed)
  3. Power sunroof vent (switch center button pushed)
scientia non olet · About LEMON Manuals