LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 262 (Ignition System (Service Information)) >> Ignition System - Service Information >> Coil - Ignition >> Removal >> Coil - Ignition - 5.7/6.1L

Coil - Ignition - 5.7/6.1L

WARNING: This page is about a different car, the 2008 Dodge Magnum, 2008 Dodge Charger, and 2008 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Ignition Coil Mounting Bolts - 5.7L/6.1L
GC0038691Courtesy of CHRYSLER LLC
  1. Disconnect and isolate the negative battery cable.
  2. Unlock electrical connector (1) by pressing on tab while pulling electrical connector from coil.
  3. Remove two coil mounting bolts (3).
    Fig 2: Removing/Installing Ignition Coil
    GC0038216Courtesy of CHRYSLER LLC
  4. Carefully pull up coil from cylinder head opening with a slight twisting action. Twisting will help break loose boots (1) from spark plugs.
scientia non olet · About LEMON Manuals