LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 257 (Vehicle Theft Security System (Service Information)) >> Vehicle Theft Security - Service Information >> Module-Sentry Key Immobilizer >> Diagnosis And Testing >> Sentry Key Remote Entry Module

Sentry Key Remote Entry Module

WARNING: This page is about a different car, the 2008 Dodge Magnum, 2008 Dodge Charger, and 2008 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.

For proper diagnosis and testing of the Sentry Key Remote Entry Module (SKREEM), sometimes referred to as the Wireless Control Module (WCM), Remote Keyless Entry (RKE) System, and the Tire Pressure Monitoring (TPM), use a scan tool and appropriate diagnostic information.

NOTE: After a SKREEM/WCM is replaced, the ignition/transponder keys need to be programmed to the new SKREEM/WCM. Follow the directions on the diagnostic scan tool. The transponder key for the SKREES/SKIM and the RKE will both be programmed during this operation. There is no need to program the fob of the key for RKE functionality once the transponder key is programmed to the new SKREEM/WCM.
scientia non olet · About LEMON Manuals