LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 256 (Vehicle Theft Security System - Electrical Diagnostics) >> Vehicle Theft Security - Electrical Diagnostics >> DTC Troubleshooting >> B1A24-Key Not Programmed >> Diagnostic Test

Diagnostic Test

WARNING: This page is about a different car, the 2008 Dodge Magnum, 2008 Dodge Charger, and 2008 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. 1) PROGRAM ALL OF THE IGNITION KEYS 

    Turn the ignition on.

    With the scan tool, attempt to program the key(s) into the WIN.

    Was the programming of the key(s) successful? 

    Yes 

    1. Perform WIN VERIFICATION TEST .

    No 

    1. Replace the ignition key and attempt to program it into the WIN. If the DTC resets, replace and program the Wireless Ignition Node (WIN) in accordance with the Service Information.
      NOTE: If this vehicle is equipped with a Steering Column Lock Module, it must be replaced along with the WIN.
    2. Perform WIN VERIFICATION TEST .
scientia non olet · About LEMON Manuals