LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 251 (Restraints System (Service Information)) >> Restraints - Service Information >> Standard Procedure >> Service After An Airbag Deployment >> Driver Airbag

Driver Airbag

WARNING: This page is about a different car, the 2008 Dodge Magnum, 2008 Dodge Charger, and 2008 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.

After a Driver Airbag has been deployed due to a collision, the following MUST  be replaced:

  1. Driver Airbag
  2. Clockspring Assembly
  3. Steering Wheel
  4. Complete Steering Column Assembly w/Lower Steering Column Coupler

All other airbag and vehicle components should be closely inspected following any airbag deployment, and should be replaced when visible damage is incurred.

WARNING: Do not connect the battery negative cable. See DIAGNOSIS AND TESTING . Personal injury or death may result if the system test is not performed first.