LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 251 (Restraints System (Service Information)) >> Restraints - Service Information >> Adjuster-Front Seat Belt Height >> Removal >> Adjuster-Front Seat Belt Height

Adjuster-Front Seat Belt Height

WARNING: This page is about a different car, the 2008 Dodge Magnum, 2008 Dodge Charger, and 2008 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Trim Cover
GC0016633Courtesy of CHRYSLER LLC
  1. Remove the upper turning loop (3) trim cover (2).
  2. Remove the upper turning loop retaining bolt (4).
    Fig 2: B-Pillar Trim
    GC0013498Courtesy of CHRYSLER LLC
  3. Remove the upper B-pillar trim. Refer to REMOVAL .
    Fig 3: Seat Belt Height Adjuster
    GC0016632Courtesy of CHRYSLER LLC
  4. Remove the two bolts (1) to the seat belt height adjuster (2).
scientia non olet · About LEMON Manuals