LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 250 (Audio System & Video System (Service Information)) >> Audio/Video - Service Information >> Module-Antenna >> Removal >> Module-Antenna >> Sedan

Audio/Video - Service Information: Module-Antenna: Removal: Module-Antenna: Sedan

WARNING: This page is about a different car, the 2008 Dodge Magnum, 2008 Dodge Charger, and 2008 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Wire Harness Connectors & Antenna Cable
GC0015561Courtesy of CHRYSLER LLC
  1. Disconnect and isolate the battery negative cable.
  2. Remove C-pillar upper trim.
  3. Disconnect wire harness connectors and antenna cable.
  4. Remove mounting fasteners and antenna module.
scientia non olet · About LEMON Manuals