Oil Pump
WARNING: This page is about a different car, the 2008 Dodge Magnum, 2008 Dodge Charger, and 2008 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
| 1 - PUMP HOUSING |
| 2 - REACTION SHAFT SUPPORT |
| 3 - PUMP GEARS |
- Remove the reaction shaft support bolts.
- Remove the reaction shaft support (2) from the pump housing (1).
1 - PUMP HOUSING 2 - OUTER PUMP GEAR 3 - INNER PUMP GEAR 4 - REACTION SHAFT SUPPORT 5 - SEAL RINGS (4) 6 - REACTION SHAFT 7 - CRESCENT - Remove the pump gears (2, 3) and check for wear and damage on pump housing (1) and gears (2, 3).