LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 249 (42RLE Automatic Transmission (Service Information)) >> 42RLE - Service Information >> Mechanism-Shift >> Removal >> Shift Mechanism

Shift Mechanism

WARNING: This page is about a different car, the 2008 Dodge Magnum, 2008 Dodge Charger, and 2008 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Gearshift Cable at Shifter Assembly
GC0012787Courtesy of CHRYSLER LLC
1 - GEARSHIFT CABLE
2 - CABLE RETAINER AND NOTCH
3 - SHIFTER ASSEMBLY PIN
4 - SHIFT LEVER
5 - ADJUSTMENT BOLT
  1. Remove any necessary console parts for access to shift lever assembly and shifter cables. Refer to REMOVAL .
  2. Shift transmission into PARK.
  3. Disconnect the transmission shift cable (1) at shift lever (3) and shifter assembly bracket (2).
  4. Remove the shift cable retainer (2) from the notch in the shifter assembly (2).
    Fig 2: Shifter Wiring Connectors
    GC0012829Courtesy of CHRYSLER LLC
    1 - SHIFTER ASSEMBLY
    2 - WIRING CONNECTORS
  5. Disengage all wiring connectors (2) from the shifter assembly (1).
    Fig 3: Shifter Assembly
    GC0012828Courtesy of CHRYSLER LLC
    1 - SHIFTER ASSEMBLY
    2 - NUTS
    3 - GEARSHIFT CABLE
  6. Remove all nuts (2) holding the shifter assembly (1) to the floor pan.
  7. Remove the shifter assembly (1) from the vehicle.
scientia non olet · About LEMON Manuals