LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 249 (42RLE Automatic Transmission (Service Information)) >> 42RLE - Service Information >> Diagnosis And Testing >> Hydraulic Pressure Tests - 42RLE >> TEST TWO - SELECTOR IN MANUAL 2 (Second Gear)

TEST TWO - SELECTOR IN MANUAL 2 (Second Gear)

WARNING: This page is about a different car, the 2008 Dodge Magnum, 2008 Dodge Charger, and 2008 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: This test checks the underdrive clutch hydraulic circuit as well as the shift schedule.
  1. Attach gauge to the underdrive clutch tap.
  2. Move selector lever to the MANUAL 2 position.
  3. Allow vehicle wheels to turn and increase throttle opening to achieve an indicated vehicle speed of 30 mph.
  4. In second gear the underdrive clutch pressure should read 110 to 145 psi.
scientia non olet · About LEMON Manuals