LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 249 (42RLE Automatic Transmission (Service Information)) >> 42RLE - Service Information >> Diagnosis And Testing >> Hydraulic Pressure Tests - 42RLE >> TEST ONE - SELECTOR IN MANUAL 1 (1st Gear)

TEST ONE - SELECTOR IN MANUAL 1 (1st Gear)

WARNING: This page is about a different car, the 2008 Dodge Magnum, 2008 Dodge Charger, and 2008 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: This test checks pump output, pressure regulation and condition of the low/reverse clutch hydraulic circuit and shift schedule.
  1. Attach pressure gauge to the low/reverse clutch tap.
  2. Move selector lever to the MANUAL 1 position.
  3. Allow vehicle wheels to turn and increase throttle opening to achieve an indicated vehicle speed to 20 mph.
  4. Low/reverse clutch pressure should read 115 to 145 psi.
scientia non olet · About LEMON Manuals