Driving Clutches
WARNING: This page is about a different car, the 2008 Dodge Magnum, 2008 Dodge Charger, and 2008 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
| 1 - INPUT SHAFT |
| 2 - UNDERDRIVE CLUTCH |
| 3 - OVERDRIVE CLUTCH |
| 4 - REVERSE CLUTCH |
| 5 - OVERDRIVE SHAFT |
| 6 - UNDERDRIVE SHAFT |
Three hydraulically applied input clutches are used to drive planetary components. The underdrive (2), overdrive (3), and reverse (4) clutches are considered input/driving clutches and are contained within the input clutch assembly. See Fig 1. The input clutch assembly also contains:
- Input shaft.
- Input hub.
- Clutch retainer.
- Underdrive piston.
- Overdrive/reverse piston.
- Overdrive hub.
- Underdrive hub.