EGR Valve - 3.0L Diesel Engine
WARNING: This page is about a different car, the 2008 Dodge Magnum, 2008 Dodge Charger, and 2008 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Courtesy of CHRYSLER LLC
| 1 - EXHAUST GAS RECIRCULATION (EGR) VALVE |
| 2 - MAIN ENGINE WIRING HARNESS |
| 3 - FUEL INJECTOR WIRING HARNESS |
| 4 - LEFT FUEL RAIL |
- Disconnect the negative battery cable.
- Remove engine cover.
- Disconnect the EGR valve wiring harness connector.
- Remove EGR valve retaining bolts and valve, discard the gasket.