Valve - Positive Crankcase Vent - 6.1L

WARNING: This page is about a different car, the 2008 Dodge Magnum, 2008 Dodge Charger, and 2008 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: PCV Valve O-Ring

Courtesy of CHRYSLER LLC

Check condition of PCV valve o-ring (2).
Check condition of PCV valve threads (3). Clean if necessary.

Fig 2: PCV Hose - 6.1L
Courtesy of CHRYSLER LLC

The PCV valve (1) is threaded into the right-front corner of the intake manifold.
Install valve (1) into intake manifold.
Install rubber hose (2) to valve.