Valve - Positive Crankcase Vent - 5.7L

WARNING: This page is about a different car, the 2008 Dodge Magnum, 2008 Dodge Charger, and 2008 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: PCV Valve - 5.7L

Courtesy of CHRYSLER LLC

Clean out intake manifold opening.
Check condition of two O-rings (2) on PCV valve (1).
Apply engine oil to two O-rings.

Fig 2: PCV System - 5.7L
Courtesy of CHRYSLER LLC
Place PCV valve (3) into intake manifold and rotate 90 degrees clockwise for installation.