Valve - Positive Crankcase Vent - 2.7L

WARNING: This page is about a different car, the 2008 Dodge Magnum, 2008 Dodge Charger, and 2008 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: PCV Valve - 2.7L

Courtesy of CHRYSLER LLC

Install Positive Crankcase Ventilation (PCV) valve (2) to cylinder cover (1).
Install the intake manifold. Refer to INSTALLATION .

Fig 2: PCV Hose Removal
Courtesy of CHRYSLER LLC
Install the PCV hose (2) to PCV valve (1).

Fig 3: Air Inlet Hose At Throttle Body
Courtesy of CHRYSLER LLC
Install the Exhaust Gas Recirculation (EGR) Valve tube. See INSTALLATION .
Install the air inlet hose (1) to throttle body. Tighten Clamp (2).