LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 245 (Instrument Cluster (Service Information)) >> Instrument Cluster - Service Information >> Removal >> Instrument Cluster

Instrument Cluster

WARNING: This page is about a different car, the 2008 Dodge Magnum, 2008 Dodge Charger, and 2008 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Instrument Cluster Bezel
GC0016049Courtesy of CHRYSLER LLC
  1. Disconnect and isolate the battery negative cable.
    WARNING: Wait two minutes for the airbag system reserve capacitor to discharge before beginning any airbag system or component service. Failure to do so may result in accidental airbag deployment, personal injury or death.
  2. Remove the instrument cluster bezel. Refer to REMOVAL .
  3. Remove the four cluster retaining screws.
  4. Disconnect the cluster electrical connectors.
  5. Remove cluster from instrument panel.
scientia non olet · About LEMON Manuals