LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 245 (Instrument Cluster (Service Information)) >> Instrument Cluster - Service Information >> Installation >> Instrument Cluster

Instrument Cluster

WARNING: This page is about a different car, the 2008 Dodge Magnum, 2008 Dodge Charger, and 2008 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Instrument Cluster Bezel
GC0016049Courtesy of CHRYSLER LLC
  1. Position cluster into instrument panel opening.
  2. Connect the cluster electrical connectors.
  3. Install the four cluster retaining screws.
  4. Install the cluster bezel. Refer to INSTALLATION .
  5. Connect the battery negative cable.
scientia non olet · About LEMON Manuals