LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 244 (6.1L Engine (Service Information)) >> Manifolds >> Manifold-Exhaust >> Removal >> Exhaust Manifolds >> Exhaust Manifold - Left Side

Exhaust Manifold - Left Side

WARNING: This page is about a different car, the 2008 Dodge Magnum, 2008 Dodge Charger, and 2008 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Air Cleaner Housing
GC0040352Courtesy of CHRYSLER LLC
  1. Disconnect negative battery cable.
  2. Remove air cleaner housing (1).
  3. Remove coolant bottle, and set aside without removing hoses. Refer to REMOVAL .
  4. Remove the top row of bolts from manifold from under the hood.
  5. Support and raise the vehicle on a hoist.
  6. Remove the lower splash shield.
  7. Remove the exhaust pipe as an assembly.
  8. Remove the knock sensor.
  9. Remove the bottom row of bolts from manifold from under vehicle.
  10. Remove manifold from under vehicle.
scientia non olet · About LEMON Manuals