LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 244 (6.1L Engine (Service Information)) >> Lubrication >> Pump-Engine Oil >> Installation >> Oil Pump

Oil Pump

WARNING: This page is about a different car, the 2008 Dodge Magnum, 2008 Dodge Charger, and 2008 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: OIL PUMP R+I
GC0040471Courtesy of CHRYSLER LLC
  1. Position the oil pump onto the crankshaft and install the 4 oil pump retaining bolts.
  2. Tighten the oil pump retaining bolts to 28 N.m (250 in. lbs.).
  3. Install the timing chain cover. See INSTALLATION .
  4. Install the pick-up tube and oil pan. See INSTALLATION .
scientia non olet · About LEMON Manuals