LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 244 (6.1L Engine (Service Information)) >> Engine Block >> Seal-Crankshaft Oil-Front >> Removal >> Crankshaft Oil Seal - Front

Crankshaft Oil Seal - Front

WARNING: This page is about a different car, the 2008 Dodge Magnum, 2008 Dodge Charger, and 2008 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Crankshaft Damper Removal
GC0040415Courtesy of CHRYSLER LLC
1 - Special Tool 1023 Puller
2 - Special Tool 8513A Insert
  1. Disconnect negative cable from battery.
  2. Remove accessory drive belt. Refer to REMOVAL .
  3. Drain cooling system. Refer to STANDARD PROCEDURE .
  4. Remove upper radiator hose.
  5. Remove radiator shroud attaching fasteners.
  6. Remove radiator cooling fan and shroud. Refer to REMOVAL .
  7. Remove crankshaft damper bolt.
  8. Remove damper using the Crankshaft Insert 8513A (2) and Three Jaw Puller 1023 (1). See REMOVAL .
    Fig 2: Front Crankshaft Seal Removal
    GC0040414Courtesy of CHRYSLER LLC
    1 - Special Tool 9071
    2 - Seal
  9. Use Seal Remover 9071 (1) to remove the crankshaft front seal (2).
scientia non olet · About LEMON Manuals