LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 244 (6.1L Engine (Service Information)) >> Engine Block >> Damper-Vibration >> Removal >> Vibration Damper

Vibration Damper

WARNING: This page is about a different car, the 2008 Dodge Magnum, 2008 Dodge Charger, and 2008 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect negative cable from battery.
  2. Remove accessory drive belt. Refer to REMOVAL .
  3. Drain cooling system. Refer to STANDARD PROCEDURE .
  4. Remove radiator upper hose.
  5. Remove fan shroud. Refer to REMOVAL .
  6. Remove vibration damper bolt.
    Fig 1: VIBRATION DAMPER REMOVAL
    GC0040436Courtesy of CHRYSLER LLC
    1 - Special Tool 1023 Puller
    2 - Special Tool 8513A Insert
  7. Remove damper using Special Tools 8513A Insert and 1023 Three Jaw Puller.
scientia non olet · About LEMON Manuals