LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 244 (6.1L Engine (Service Information)) >> Cylinder Head >> Valves & Seats-Intake/Exhaust >> Removal >> Valves And Valve Springs

Valves And Valve Springs

WARNING: This page is about a different car, the 2008 Dodge Magnum, 2008 Dodge Charger, and 2008 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Head Bolt Tightening Sequence
GC0040379Courtesy of CHRYSLER LLC
  1. Remove the cylinder head. See REMOVAL .
    Fig 2: Valve Spring R+I Exhaust
    GC0040372Courtesy of CHRYSLER LLC
  2. Compress valve springs using Valve Spring Compressor C-3422 (1) and adapter 8464.
    Fig 3: Valve Assembly Configuration
    GC0040355Courtesy of CHRYSLER LLC
  3. Remove valve retaining locks (1), valve spring retainers (2), valve stem seals (3) and valve springs (6).
  4. Before removing valves, remove any burrs from valve stem lock grooves to prevent damage to the valve guides. Identify valves to ensure installation in original location.
scientia non olet · About LEMON Manuals