LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 243 (5.7L Engine (Service Information)) >> Lubrication >> Cooler Engine Oil >> Removal >> Removal

Cooler Engine Oil: Removal: Removal

WARNING: This page is about a different car, the 2008 Dodge Magnum, 2008 Dodge Charger, and 2008 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise vehicle on hoist.
  2. Drain cooling system. Refer to STANDARD PROCEDURE .
  3. Disconnect oil cooler coolant hoses.
  4. Remove oil filter.
  5. Remove oil cooler connector bolt.
  6. Remove oil cooler.
scientia non olet · About LEMON Manuals