Engine Mount - Rear

WARNING: This page is about a different car, the 2008 Dodge Magnum, 2008 Dodge Charger, and 2008 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Crossmember

Courtesy of CHRYSLER LLC

1 - Trans Mount Bracket

2 - Crossmember

3 - Bolts

Raise the vehicle on a hoist.
Using a suitable jack, support transmission.

Remove the crossmember (2).

Fig 2: Transmission Mount

Courtesy of CHRYSLER LLC

1 - Bolts

2 - Trans Mount Bracket

3 - Trans Mount

Remove the fasteners (1) from the transmission mount (3) to crossmember.
Remove the mount (3).

Fig 3: Trans Mount Bracket
Courtesy of CHRYSLER LLC

1 - Bolts

2 - Trans Mount Bracket
Remove the transmission mount bracket (2), if required.