LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 243 (5.7L Engine (Service Information)) >> Engine Mounting >> Mounting-Engine Rear >> Installation >> Engine Mount - Rear

Engine Mount - Rear

WARNING: This page is about a different car, the 2008 Dodge Magnum, 2008 Dodge Charger, and 2008 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Trans Mount Bracket
GC0015470Courtesy of CHRYSLER LLC
1 - Bolts
2 - Trans Mount Bracket
  1. Install the transmission mount bracket (2), if removed.
    Fig 2: Transmission Mount
    GC0015471Courtesy of CHRYSLER LLC
    1 - Bolts
    2 - Trans Mount Bracket
    3 - Trans Mount
  2. Position the transmission mount (3) on the transmission mount bracket (2). Install the bolts (1) that attach the transmission mount (3) to the bracket (2).
  3. Torque the bolts to specified torque.
    Fig 3: Crossmember
    GC0015472Courtesy of CHRYSLER LLC
    1 - Trans Mount Bracket
    2 - Crossmember
    3 - Bolts
  4. Install the crossmember (2).
scientia non olet · About LEMON Manuals