LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 243 (5.7L Engine (Service Information)) >> Engine Block >> Solenoid-MDS >> Diagnosis And Testing >> MDS Solenoid

MDS Solenoid

WARNING: This page is about a different car, the 2008 Dodge Magnum, 2008 Dodge Charger, and 2008 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.

The Multi Displacement System has the following detectable issues:

  1. Solenoid circuit
  2. Fail to deactivate a cylinder(s)
  3. Fail to reactivate a cylinder(s)
  4. Low oil pressure
CONDITION POSSIBLE CAUSES CORRECTION
MDS does not activate 1. Low oil pressure 1. Check for proper oil pressure
2. Bad oil temp sensor 2. Replace oil temp sensor
- 3. Malfunctioning MDS Solenoid 3. Replace Solenoid
- 4. Malfunctioning MDS Tappet 4. Replace Tappet
MDS Does Not Deactivate 1. Low oil pressure 1. Check for proper oil pressure
2. Bad oil temp sensor 2. Replace oil temp sensor
- 3. Malfunctioning MDS Solenoid 3. Replace Solenoid
- 4. Malfunctioning MDS Tappet 4. Replace Tappet