LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 243 (5.7L Engine (Service Information)) >> Diagnosis And Testing >> Engine Diagnosis - Introduction

Engine Diagnosis - Introduction

WARNING: This page is about a different car, the 2008 Dodge Magnum, 2008 Dodge Charger, and 2008 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.

Engine diagnosis is helpful in determining the causes of malfunctions not detected and remedied by routine maintenance.

These malfunctions may be classified as either performance (e.g, engine idles rough and stalls) or mechanical (e.g, a strange noise).

See ENGINE DIAGNOSIS - MECHANICAL , SERVICE DIAGNOSIS - MECHANICAL  or ENGINE DIAGNOSIS - PERFORMANCE  for possible causes and corrections of malfunctions.

Additional tests and diagnostic procedures may be necessary for specific engine malfunctions that can not be isolated with the Service Diagnosis charts. Information concerning additional tests and diagnosis is provided within the following diagnosis:

  1. Cylinder Compression Pressure Test. See CYLINDER COMPRESSION PRESSURE .
  2. Cylinder Combustion Pressure Leakage Test. See CYLINDER COMBUSTION PRESSURE LEAKAGE .
  3. Engine Cylinder Head Gasket Failure Diagnosis. See CYLINDER HEAD GASKET FAILURE .
  4. Intake Manifold Leakage Diagnosis. See INTAKE MANIFOLD LEAKAGE .