LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 242 (3.5L Engine (Service Information)) >> Valve Timing >> TENSIONER - Timing Belt & Pulley >> Installation >> Timing Belt TENSIONER Pulley Assembly

Timing Belt TENSIONER Pulley Assembly

WARNING: This page is about a different car, the 2008 Dodge Magnum, 2008 Dodge Charger, and 2008 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing/Installing Tensioner Pulley
GC0002014Courtesy of CHRYSLER LLC
1 - TENSIONER PULLEY
2 - PIVOT BOLT
3 - TENSIONER BRACKET
  1. Install the timing belt tensioner pulley (1) assembly. Tighten the pivot bolt (2) to 61 N.m (45 ft. lbs.). See Fig 1.
  2. Install the timing belt. See INSTALLATION .
scientia non olet · About LEMON Manuals